Plain paper productivity at your point of need.
A Powerful Package: Productivity Where You Need It... When You Need It.
The Xerox 3030 Engineering Copier is a point-of-need plain-paper copier with powerful productivity features. It's compact and environmentally friendly. The 3030 gives you walk-up convenience, automatic operation and a clear, easy-to-use graphic interface. Taking full advantage of the 3030's functionality is as simple as pushing a few buttons.
In terms of paper and toner, it takes only small change to make a copy. Until you factor in the element of time. The time it takes to send out for copies. The time spent walking the halls to the reprographics department. Some copying jobs have a way of turning small change into big bucks.
But there's also an opportunity for big savings. The Xerox 3030 Engineering Copier can help you realize that opportunity. It's a point-of-need plain-paper copier with powerful productivity features. And it's compact, aesthetically pleasing and environmentally friendly.
The 3030 gives you walk-up convenience, automatic operation and a clear, easy-to-use graphic interface. Taking full advantage of the 3030's functionality is as simple as pushing a few buttons.
Copy from original drawings, bluelines, sepias, CAD plots and cut-and-tape composites onto bond, vellum or film. Produce up to 15 copies from a single feed. Select automatic Synchro-cut or key in specific cut length. The 3030 makes size-for-size copies up to 36 inches wide by any manageable length at a speed of four D-size copies per minute.
There's a manual bypass for feeding cutsheet media. And our standard copy stacker and optional document stacker deliver added convenience and operator efficiency for handling copies and originals.
Change Is Inevitable. That's Why Your Engineering Documents Have To Be Flexible.
With the 3030, you can keep your documents as dynamic as your technology. Drawing elements can be updated via cut-and-tape editing methods to form new concept drawings quickly, right in the drawing room. Remember, your productivity is directly related to the flow of engineering information. With a 3030 at the point of need, you can make sure that vital flow won't get bogged down.
The Quality Of Your Information Is Directly Related To The Quality Of Your Documents.
You can be sure that your documents will be crisp and clear, because the Xerox 3030 uses high-quality xerographic imaging technology. This helps eliminate mistakes whether you're putting together a bid set, on the manufacturing line, at the job site or in prototype development.
Restore old drawings (opaque, translucent, pasteups, bluelines) to "like new" condition, with the added storage and handling benefits of plain-paper media. The 3030 gives you added control of copy quality in terms of contrast and density.
The 3030 protects your investment in information and helps you maintain the quality of your documents over the long haul.
The 3001 is so compact and quiet, it can be used anywhere. It's attractive enough to be used in the president�s office and robust enough for the manufacturing floor and any environment in between. Just plug it in, and start using it.
-
Compact footprint (57 inches wide by 27 inches deep) 115 volt, 20 amp power requirements
-
LED status display and control panel with easy-to-understand dual-language message display and straightforward user interface graphics
-
Built-in Auditron lets you track usage by specific job or project
-
Attractive appearance and quiet operation.
Throughput
-
Presentation-quality engineering copies on bond, vellum or film up to 36 inches wide by any manageable length
-
Up to 15 copies from a single original up to 36 inches by 60 inches
-
Up to 6 C-size, 4 D-size or 2 E-size prints per minute
-
One roll of 36" by 500' bond or vellum, or 36" by 150' drafting film
Versatility
-
Input documents - original drawings, bluelines, sepias and fragile documents, such as cut-and-tape composites, on opaque and translucent media, and rigid originals up to 1/8-inch thick
-
Output media - bond, vellum or film - manual bypass feature for special media requirements
-
Select lead edge and/or trail edge to create margins for applications such as binding or three-hole punching
-
Additional Features
-
Interactive dual-language message display communicates the status of the copier and display instructions for operation and maintenance
-
On-board electronic Auditron with capacity for 250 individual accounts in three modes: access control, assigned account, copy inhibit.
-
Partial copy enables users to reproduce only the data they need for a particular task. Only the portion containing the required data will be reproduced which will reduce the time and expense for reproduction.
-
In the "Sets" mode, prints are delivered in sequence to the copy stacker conveniently located in front of the 3030, all ready to either bind or staple
Accessories
-
Work Organizer
-
Long Document Guide
-
Portable Data Printer
-
Document Stacker
Optional Accessories
-
Work Organizer - convenient storage tray for originals enhances operator efficiency; provides easier handling of valuable originals
-
CVA Printer - lets you print out data from your Auditron for reporting, billing and budgeting purposes
-
Document Stacker - used to stack documents when copying sets of originals
-
Long Document Guides - enable easy handling of long original
| Specifications |
|
|
|
Maximum size
|
36" x 20' long in single copy mode; 36" x 60" long multicopy mode |
|
Minimum size
|
8 1/2" x 11" (portrait) |
|
Types
|
Opaque, translucent and transparent documents. Note: A document carrier (8R3628) is recommended for damaged or very delicate documents |
|
|
|
Warm-up time
|
Standby less than 3 minutes; cold start 5-7 minutes |
|
First Copy Out Time
(FCOT)
|
Less than 20 seconds D size (24" x 36") |
|
Multiple copies
|
Selectable, 1-15 copies per document |
|
Copy throughput
|
2 E size (36" x 48") per minute; 4 D size (24" x 36") per minute; 6 C size (18" x 24") per minute |
|
|
|
Type
|
20 lb. xerographic bond, 20 lb. xerographic Zero Solvent vellum and .004 drafting film |
|
Media Supply
|
Roll stock selectable from one on-line feed roll; either 36" x 500' bond or vellum or 36" x 150' .004 drafting film.
(Manual bypass for special media applications) |
|
|
|
Product size
|
Height 46.25"; Width 57"; Depth 27"; Weight: 500 lbs |
|
Installation Space
|
105" x 87" |
|
Agency approvals
|
UL and CSA |
|
Power Requirements
|
115 VAC/20 amp dedicated line |
| Product specifications subject to change without notice. |
